내부 현수막
업데이트 내용

자료

Nanoox 시스템

십삼투성

양질 원단

독특한 미투 기술인 3.6m3/m2/h(0.2cm/ft2)의 작은 침투성, 결로와 절능 사이의 적절한 균형에 이르기까지 작은 비례의 기류는 직물 표면에 침투 방지대부분의 공기는 정확하게 계산한 공구에서 매우 빠른 속도로 목표 영역을 배출해 높은 공간의 에너지낭비를 줄였다.


diverdified-project-application.jpg  


Nanoox 시스템


재료 성능 및 제품 성능 지표


Property
ItermsApplicationRequirementIndexCode complianceRemarks
Material propertyPermeationError rate of permeation index <5% (under 125pa or at 0.5w.g)Ventilation areaNon-permeable Omm/sGB/T5453-1997National textile products quality supervision and inspection centerTo make sure the air dispersion performance,the permeability should be selected carefully according to the installation height,air volumn,air pressure and condensation free and energy saving
High and large space/space with fast end air velocityMicro-permeability 1,2,5mm/s
Middle or low space/space with slow end air velocityMedium-permeability 10,20,30mm/s
Low space/slow end air velocityLarge-permeability 40,80,100mm/s
Fire safetyBAbove the groundWash durability 50 times B-s1,d0, t0 Smoke Toxicity ZA Class1

GB 8624-2012

GB20286-2006

EN13501-1:2007

National fireproof construction material quality supervision and inspection centerProduct quality tracking;Certification of fire retardant identity in public places Wash durablitiy 50 times
A2High-rise/basement/strict fire safety spaceA2-s1,d0,t0GB 8624-2012National fireproof construction meterial quality supervision and inspection centerFormal testing
Other physical propertiesClean and fiber sheddingAll application areaNo particle detachmentAc167 and UI181ULFormal testing
Mildew resistanceAll application areaDuring the 60 days UL 181 test,no microblal breakage or decomposition
Health and safety of textilesAll application areaPH4.0-7.5 Formaldehyde content<=20mg/kg no peculiar smell.GB18401-2003National textile products quality supervision and inspection center
Product PropertyPressure resistance
Under the static pressure of 1900pa,no change of the sampleNo changeAc167 and UL 187ULFormal test and approval
회사


Insusox 시스템


재료 성능과 제품 성능 지표


Property ItemsIndexResutsCode compliance
Material PropertyFire safetyB/S1/d0/t0 Class 1&Class0B1(B-s2,d0,t0)GB8624-2012 EN13501-1:2007 UL 2518 BS 476-6,7:1997
Thermal conductivity0C(average temperature),<=0.0360.033GB/T 17794-2008 ASTMC 177/C518-10
Moisture Permeabilitywater vapor permeability<=1.3 X 10 -10g/(s.m.Pa)1.0 x 10^-10ASTME96-10
Moisture resistance factor>=1.5x10^32 x 10^4ASTEM96-10
Water absorption(by volume)<=0.3%0.17%ASTMC209-07
Product performancePressure resistanceWhen the pressure reaches 2000pa,the product is normal without any breakageNo changeAC 167 & UL 181
Air leakage volume (m^3/h.m^2)When inner static pressure is 5000pa,the leakage per unit area Qa<=3

0.31

1.34

JGJ141-2004
When inner static pressure is 1000pa,the leakage per unit area Qa<=1.57
DurabilityAir leakage after durability test is less than 80% of the air leakage before the best37%JG/T258-2009
Anti-condensationThere is no condensation at the duct surface,flange joint,and support reinforcementCondensation freeJG/T258-2009

회사
미국 판매 사무소
(206) 707-6768
아시아 판매 센터
+86-5711-591900
따라오세요.